Chuyển tới nội dung

Bộ lọc khí – Điều Áp – Đồng hồ Pneumax – Made in ITALY

  • bởi

Một số loại mẫu Bộ lọc khí điều áp của thiết bị tự động hoá Pneumax – ITALY

 Bộ lọc khí – Điều Áp – Đồng hồ Pneumax – Made in ITALY

Operational characteristics Bộ lọc khí Pneumax

Filter – diaphragm pressure regulator with relieving.
– Low hysteresis rolling diaphragm Bộ lọc khí
– Balanced system.
– Double filtering action: air flow centrifugation and filter element.
– Filtering element made of HDPE (high density polyethylene)
available in three different filtration grades (5μm, 20μm e 50μm)
can be regenerated by washing it or replaced.
– Transparent bowl made off polycarbonate with
bowl protection guard.
– Bowl assembly via bayonet type quick coupling mechanism
with safety button.
– Available in four pressure ranges up to 12 bar.
– Operating knob can be locked in position by pressing
it down once the desired P2 (regulated pressure) pressure
value is achieved.
– Fitted with panel mounting locking ring.
Pressure switch as standard Bộ lọc khí

Technical characteristics Bộ lọc khí – Điều áp Pneumax

Connections
Max. inlet pressure
Working temperature
Weight with Technopolymer threads
Weight with threaded inserts Bộ lọc khí
Filter pore size
Bowl capacity
Assembly positions
Max. fitting torque
(with Technopolymer threads)
Minimum working pressure Bộ lọc khí
with automatic drain
Maximum working pressure
with automatic drain
G 1/8” – G 1/4”
13 bar
-5°C ÷ +50°C
gr. 200
gr. 210
0-2 bar / 0-4 bar
0-8 bar / 0-12 bar
5 μm – 20 μm – 50 μm
3 18 cm
Vertical
Example: T171BEPBCA : size 1, Filter-regulator with Technopolymer threads, G1/4″ connections, 20 μm filtering pore size, 0 to 8 bar adjusting range, with pressure switch with M8 connector PNP
* Bowl removal maximum height
G1/4″ = 9 Nm

Note

The pressure must be always regulating while increasing. For
a more precise regulation and higher sensibility, the use of a
regulator with a pressure range as close as possible to the
regulated pressure is recommended. In order to drain the
liquid use a 6mm fitting minimum diameter

1700 Series – Size 1

Air Service Units Size 1
G1/8″-G1/4″

1700 Series – Size 2

Air Service Units Size 2
G1/4″-G3/8″

1700 Series – Size 3

Air Service Units Size 3
G3/8″-G1/2″

1700 Series – Size 4

Air Service Units Size 4
G1″

Serie 1700 – Electronic proportional regulator

Electronic proportional regulator

Series 1700 – Pressure booster P+ Series

Pressure booster P+ Series

Series 1700 – Pressure booster

Pressure boosters

Series 1700 – Size 1 AIRPLUS

Ari service units Size 1 – AIRPLUS
G1/8″-G1/4″

Series 1700 – Size 2 AIRPLUS

Pneumax Filter regulator
Pneumax Filter regulator
Ari service units Size 2 – AIRPLUS
G1/4″-G3/8″

Series 1700 – Size 3 AIRPLUS

Ari service units Size 3 – AIRPLUS
G3/8″-G1/2″

Tags : Bộ lọc khí Pneumax